Nail Drill KRYPTON II XPS-300 for 70 W 30,000 rpm

The KRYPTON II XPS-300 nail drill allows for easy and efficient hardware manicures and pedicures. It is extremely comfortable and ergonomic. This is the most powerful model in the professional drill line. The handpiece with a micromotor operates smoothly and without any vibrations. It is equipped with an easy-to-use drill bit change mechanism. The chuck securely locks the bit in place and is centrally positioned on the body, making it impossible to unlock accidentally during operation. The control unit is ultra-compact compared to analog models, taking up minimal space on the worktable. The unit features a stylish, updated design with a modern LED display that shows the current speed and operating mode. All control buttons — forward, reverse, and foot control — are within easy reach. Speed adjustment is now right in front of the technician, eliminating the need to fumble or search for side controls. The KRYPTON II is equipped with three powerful features that will transform your workflow and dramatically enhance comfort and efficiency.

Features of the KRYPTON II XPS-300:

• EASY CONTROL function – smart electronic switching between forward/reverse on the go.
• FREE FOOT function – acts as a pause function. In foot control mode, set your desired speed, press the pedal once to start working. Need a break? Just press the pedal again to pause.
• PROTECTION+ function – protects your drill from overload and damage. If a bit is inserted and the chuck isn't fully closed, or the device is turned on without a bit, the drill will emit a beep within 3–5 seconds, display error code E4, and automatically lock to prevent motor or collet damage.

Advantages of the KRYPTON II XPS-300:

• Compact and portable control unit
• Smooth speed adjustment
• Foot pedal for on/off control
• Reverse – easy switch for rotation direction
• Long operation without noise, vibrations, or overheating
• Overload protection feature
• Handpiece cooling system

Specifications:

Package includes:

• Power supply unit
• Micromotor handpiece
• Foot control pedal
• Handpiece holder
• User manual
• Warranty card
• Warning letter

HOW TO USE:

1. Before use, plug the device into an outlet.
2. Press the locking button and unscrew the metal tip.
3. Insert the bit into the handpiece (without releasing the lock) and tighten securely.
4. To replace the bit, press the locking button, unscrew the metal tip, and swap the bit.
5. Avoid overtightening and never use damaged bits.
6. Turn the speed control to set the desired rotation speed.
7. After use, turn off the device and unplug it from the power source.

WARNINGS:

1. Always turn off the device before changing the bit.
2. Never press the locking button while the device is running.
3. Do not touch the bit or metal tip after use, as they may be very hot.
4. Avoid inhaling dust or getting it into your eyes.
5. Unplug the device from the power source if not used for an extended period.
6. Store in a dry place, out of reach of children.